Hatz 1B40

Hatz 1B40The Hatz 1B40 is a 462 cc, (28.19 cu-in) single-cylinder air-cooled 4-stroke internal combustion diesel engine with a horizontal shaft, manufactured by Motorenfabrik Hatz GmbH & Co. KG for general-purpose applications.

This engine has a single-cylinder, overhead valves, and direct injection fuel system. The Hatz 1B40 engine can be equipped with a recoil starter or electric starter motor 12 or 24 Volts.

An 88.0 mm (3.46 in) cylinder bore and 76.0 mm (2.99 in) piston stroke give the 1B40 engine a total of 462 cc, (28.19 cu-in) of displacement. Compression ratio rating is 20.5:1. It produced from 5.2 PS (3.8 kW; 5.1 HP) at 1,500 rpm to 10.2 PS (7.5 kW; 10.1 HP) at 3,600 rpm of maximum output. The torque is 24.9 N·m (2.5 kg·m, 18.4 ft·lb) at 2,300 rpm.

General information

Engine Specifications
Model 1B40
Type 4-stroke, single cylinder
Displacement 462 cm 3 (28.19 cu-in)
Max. horsepower 10.2 PS (7.5 kW; 10.1 HP) at 3,600 rpm
Max. torque (crank PTO) 24.9 N·m (2.5 kg·m, 18.4 ft·lb) at 2,300 rpm
Cooling system Forced-air
Lubricating system Forced spray
Starting system Recoil starter or Electric starter motor
Fuel used Diesel fuel
Fuel tank capacity 5.0 L (1.32 US. gal. 1.1 Imp. gal.)
Fuel consumption –
PTO shaft rotation Counterclockwise (from PTO shaft side)

Dimensions and Weight

1B40
Length, mm (in) 348 (13.7)
Width, mm (in) 392 (15.4)
Height, mm (in) 480 (18.9)
Dry weight, kg (lb) With recoil starter: 48.0 (105.8)
With electric starter: 53.3 (115.7)

Service Information

Engine
Maximum speed 3,600 ± 150 rpm
Valve clearance
Intake valve 0.10 mm (0.004 in)
Exhaust valve 0.10 mm (0.004 in)
Oil system
Oil type With diesel oxidation catalyst (DOC): ACEA E6
Without diesel oxidation catalyst (DOC): CF/CH-4, ACEA: B3/E4
Recommended oil SAE 5W-30, 10W-30
Oil capacity 1.5 L (1.59 US. qt, 1.32 Imp. qt.)
Oil pressure –
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists or spare parts catalogs. We are an information portal and provide the technical specifications of gasoline and diesel engines.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. We do not provide advice on technical issues related to the engines operation or repair. We do not recommend using provided information for engines repairing engines or spare parts ordering, use only official service manuals and spare-parts catalogs.

3 Comments

  1. I want to buy a Hatz Diesel Engine.
    But, I wonder the following properties of Hatz Diesel engine (1B40):
    1) what is the number of injector hole?
    2) what is the diameter of injector hole?
    3) What is the start of injection timing?

    Reply

Leave a Reply

Your email address will not be published.


*